PEmicro - P& E Microcomputer Systems: Over 3. Industry leader in Embedded Systems Development Tools, debug probes, and production programmers - CYCLONE - In- Circuit Production Flash Programmers. Overview. Product Description. PEmicro's CYCLONE programmers are powerful, in- circuit, stand- alone programmers that support devices from many manufacturers.
They are versatile tools that offers on- board storage of programming images, provides power to the target, supports manual or automated programming, and have easy- to- use touchscreen interfaces. The Cyclone series of programmers may also be used as debug probes during development and are supported by many IDEs.
PEmicro offers two models which have the same feature set and only vary by the devices supported. We are adding new support all of the time.
EasyBCD is a powerful bootloader-modification tool that has a wide-range of applications and usages. It can perform a variety of tasks ranging in complexity and.
Lazesoft Recovery Suite is a very easy to use ALL-IN-ONE boot disk that repair your crashed Windows, recover data from deleted, formatted, damaged partition, clone or.
Let us know! Connecting to a PC allows the Cyclone programmers to be automatically controlled and also allows configuration of the Cyclone (such as adding more programming images). The Cyclone connects to the PC via USB, Ethernet, or Serial connections and all three cables are provided. For Ethernet connectivity, the Cyclone programmers can either be assigned a fixed IP or can dynamically acquire one via DHCP. The Cyclone connects to the debug header of your target via a ribbon cable suitable for the architecture being programmed. The Cyclone comes with ribbon cables for all supported architectures. For direct wiring into test fixtures, where there is not defined connector, there are several headers on the Cyclone with 0. In this case, the images for programming are downloaded into the non- volatile memory of the Cyclone in advance of programming.
System Requirements : Windows 2000/XP (32- or 64-bit) Windows Vista (32- or 64-bit) Windows 7 (32- or 64-bit) Windows 8 (32- or 64-bit) Windows 10 (32- or 64-bit).
Using the start button is an extremely simple and fast way to program targets on the production line as well as perform firmware upgrades in the field. The difference between success and failure is clearly shown to the operator. The currently selected image can be changed on the touch screen. The goal is to allow full control of one or more Cyclones from the PC, either from within a custom application or from the command- line.
This includes launching programming, recovering results, managing images resident on a Cyclone, adding unique programming data for each target, and more. All of these things are possible in an automated way without an operator. The simplest fundamental control of programming looks like this .
Host PC Command Packet Launches Programming. Cyclone Image Programmed To Target.
Cyclone Recovers Successful Result Or Error To PC. Stand- alone programming of an image can be automated from a PC in several ways. Using the command- line SAP Launch utility (included with Cyclone).
Download free Windows Vista recovery disk and repair disc to fix broken, corrupted, or non-booting Windows Vista or restore your PC to a working condition. We’re going to use the built in partitioning tool called diskpart to confirm that: We have all the right partitions; EFI partition is formatted correctly. For those of you who want to root your HTC One, here’s a step-by-step tutorial for all Windows, Mac, and Linux computers, that will allow you to unlock the.
Launch programming, recover the result, and optionally change the programming image in a Cyclone from the command- line or within a batch file. Using the Automated Control SDK, Basic Edition (included with Cyclone). Allows programming control to be integrated into user applications. Allows programming to be launched and results to be recovered from a Cyclone directly from the user's own application. Using the Automated Control SDK, Professional/Enterprise Edition (not included with Cyclone). Allows programming to be launched on multiple cyclones, programming results to be recovered, dynamic data to be programmed along with the image's data, image management (add, delete, verify, etc), and more directly from the user's own application.
Also comes with a command- line executable capable of launching multiple cyclones simultaneously via a script and recovering the programming results of all cyclones. Via the Serial and Ethernet protocols directly. PC Control Of Multiple Cyclones. Interactive Debug, Programming, Test The Cyclone can be used as a debug probe via the Serial, USB, or Ethernet ports in order to connect to and debug, test, and program a microprocessor- based target from the PC. The Serial, USB, and Ethernet ports can be used to access the target hardware directly from the Host PC, while the Ethernet port allows the target hardware to be placed anywhere on the corporate LAN or even the Internet. This software is particularly useful for testing programming sequences which will be incorporated into a stand- alone programming image. The scripted version of the PROG software, CPROG, is also useful in those cases where the programming data is continually changing in a way that makes stand- alone programming less easy to implement.
Once an image is added to the Cyclone, it remains in the memory of the Cyclone until it is erased. Images may be individually added and removed from the Cyclone. In encodes any addition information needed such as serial numbers and how they count. The generated image can be stored directly to a Cyclone or to the disk of the PC for later download to the Cyclone. Data within an image is encrypted but the settings used to generate the image can be viewed.
In this way, an image will disable itself after a certain number of programs or a period of time. This power can be routed out the target ribbon cable or to the power- out jack on the Cyclone. Power is provided externally, switched through Cyclone: Power is provided to a power- in jack on the Cyclone by the user. The switched output, controlled by the programming image, is routed to the power- out jack on the Cyclone.
Additionally, on the Cyclone FX, target voltage and current consumption is shown as well. Power can be manually switched in the menu of the Cyclone as well. PEmicro has developed a Serialization mechanism to automate this process. Cyclone IP Setup Utility enables users to set network parameters, associate a name with each particular Cyclone, upgrade the Cyclone Firmware, and setup user options for LCD display. Cyclone Image Creation Utility Configures and generate a programming image which sets up their architecture, object code, programming parameters, desired communication protocols, SWD or JTAG, Target Power and Voltage Settings, image restrictions, and much more. Cyclone Image manager allows the user to manage images on their cyclone. A command- line version, CPROG, is also included.
The SAP Launch Utility may be invoked in a batch file to carry out pre- configured operations. The Barcode Test Generator utility facilitates creating a Barcode Test creates tests whether an input barcode meets the criterion that the user is looking for to be considered a match (exactly or range).